Single Channel Digital Weighing Junction Box - Hirs-1

    Suitable for hopper weighing, tank weighing, digital truck scale, industrial process weighing instruments. A single channel digital weighing J-Box Hirs-1 has all features of an AD-S module mentioned above. Besides, it can be connected to several analog load cells simultaneously and the eccentricity can be adjusted through potentiometers.

    Features and Specifications：

 ★  HardwareInterface: RS-485interface, half-duplex.

 ★  Software Protocol : Freeport/ Modbus RTU protocol (opt.)

 ★  OperatingVoltage: 9V DC / 24V DC (opt.);

 ★  Operating current:(only module)：<30ma(typical)<35ma(max)

 ★  Dimensions（mm）：185×133×31

 ★  A/D conversion,digital calibration, tare, zero setting/tracking, switch-on zero setting,anti-dithering;

 ★  All the parameters can be set through serialinterface;

 ★  Module addresses are availablefrom 0 to 31. Modules can work through bus communication;

 ★  Baud rate,parity bit and data output format can be set. 1200～38400bps;

 ★  Digital filtering: standard filtering or LPF;

 ★  Lightning protection board (opt.)

 ★  Samplingspeed: 3.125～400Hz;

 ★  Storage ofthe parameters with protection against power failure;

 ★  Complete protection: wrong wiring protection, overvoltage protection, transient voltage suppression;

 ★  Operating temperature range: -40℃～+70℃; Storage temperature range: -60℃～+90℃